Toro timecutter zs 4200t, Руководство оператора

Страница: 36 / 60

Changing the Engine Oil
Service Interval: After the first 8 hours—Change the engine
oil.
Every 100 hours—Change the engine oil (more often
in dusty, dirty conditions).
Note:
Dispose of the used oil at a recycling center.
1. Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil drains
completely.
2. Disengage the PTO, move the motion-control levers to
the neutral-locked position, and set the parking brake.
3. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position (
Figure 40 ).
A B
C
D
F E
G027539
Figure 40
4. Slowly pour approximately 80% of the specified oil
into the filler tube and slowly add the additional oil to
bring it to the
Full mark ( Figure 41 ).
B A
C
D
E
F
g027660
Figure 41
36