Cleaning the Axle Breathers
Service Interval:
Every 300 hours
1.
Clean the area around the breathers with a cleaning
solvent (Figure 75 and Figure 76).
Figure 75
1.
Front axle
3.
Breather fitting
2.
Breather port
Figure 76
1.
Rear axle
3.
Breather fitting
2.
Breather port
2.
Remove the breather from the front axle (Figure 75).
3.
Remove the breather from the rear axle (Figure 76).
4.
Clean the breathers with a cleaning solvent.
5.
Use compressed air to dry the breathers.
Important:
Wear face protection when using
compressed air.
6.
Install the breather in the front axle (Figure 75).
7.
Install the breather in the rear axle (Figure 76).
54
Содержание RT600
Страница 71: ...Notes 71...
