Note:
Ensure that the secondary element is fully
seated in the housing.
5.
Insert the primary air-cleaner element into the air-filter
housing; refer to Replacing the Primary Element (page
42).
Note:
Ensure that the primary element is fully seated
in the housing.
6.
Install the air-cleaner cover; refer to Installing the
Air-cleaner Cover (page 42).
7.
Check the restricted air-cleaner light; refer to Checking
the Restricted Air-cleaner Light (page 41).
Fuel System
Maintenance
Servicing the Fuel System
Draining the Fuel-water Separator
Service Interval:
Every 50 hours
1.
Remove the left side panel; refer to Removing the Side
Panels (page 36).
2.
Place a small drain pan under the secondary fuel filter
(Figure 52).
Figure 52
1.
Secondary-fuel filter
2.
Drain valve
3.
Rotate the drain valve at the bottom of the secondary
fuel filter 2 or 3 turns counterclockwise, and drain any
water and sediment from the fuel-water separator of
the fuel filter (Figure 52).
Note:
If the fuel-water separator has any water or
sediment, drain the water and sediment from the fuel
tank; go to step 2.
4.
When clean fuel appears, rotate the drain valve
clockwise until it is closed (Figure 52).
Note:
Do not overtighten the drain valve.
5.
Bleed the fuel system; refer to Bleeding the Fuel System
(page 45).
6.
Install the left side panel; refer to Installing the Side
Panels (page 37).
Draining Water from the Fuel Tank
1.
Place a drain pan under the drain plug in the fuel tank.
2.
Unscrew the drain plug from the fuel tank and drain
the water (Figure 53).
43
Содержание RT600
Страница 71: ...Notes 71...
