Toro Polar Trac Cab 30474, Руководство оператора

Страница: 14 / 60

g032394
Figure 17
1. Frame 3. Hose bracket
2. Bolts (5/16 x 5/8 inch)
2. Torque the bolts to 1978 to 2542 N∙cm (175 to
225 in-lb).
3. Position an R-clamp over each hose ( Figure 18 ).
g032395
Figure 18
1. Supply hose 4. Return hose
2. R-clamp
5. Flange nut (1/4 inch)
3. Carriage bolt (1/4 x 3/4
inch)
4. Use the 2 carriage bolts (1/4 x 3/4 inch) and
flange nuts to install the R-clamp and hose
assembly to the bracket mount (
Figure 18 ).
5. Torque the bolt to 1017 to 1243 N∙cm (90 to 110
in-lb).
5
Routing the Heater Hoses
Parts needed for this procedure:
1 Hose clamp (1/2 to 1-1/4 inches)
1 Straight fitting (3/8 npt x 0.625 barb)
1 Temperature sensor (Yanmar engine only)
1
Adapter (Yanmar engine only)
Routing the Supply Hose
Kubota Engine Only
1. Route the supply hose as shown in Figure 19 .
g032423
Figure 19
1. Supply hose 2. Return hose
2. Locate, disconnect, and remove the temperature
sensor (
Figure 20 ).
14