Toro Multi Pro WM, Руководство оператора

Страница: 71 / 96

Greasing the Boom Hinges
Service Interval: Every 100 hours
Important:
If you wash the boom hinge with
water, clear all water and debris from the hinge
assembly and apply fresh grease.
Grease Type: No. 2 lithium grease
1. Wipe the grease fittings clean so that foreign
matter cannot be forced into the bearing or
bushing.
2. Pump grease into the bearing or bushing at
each fitting
Figure 100 .
g002014
Figure 100
Right boom
1. Grease fitting
3. Wipe off excess grease.
4. Repeat this procedure for each boom pivot.
Spray System
Maintenance
WARNING
Chemical substances used in the
spreader-sprayer system may be hazardous
and toxic to you, bystanders, animals, plants,
soils or other property.
• Carefully read and follow the chemical
warning labels and material safety data
sheets (MSDS) for all chemicals used and
protect yourself according to the chemical
manufacturer's recommendations. Ensure
that as little skin as possible is exposed
while using chemicals. Use appropriate
personal protective equipment (PPE)
to guard against personal contact with
chemicals; personal protective equipment
includes:
– safety glasses, goggles, and/or face
shield
– respirator or filter mask
– chemical-resistant gloves
– rubber boots or other substantial
footwear
– hearing protection
– clean change of clothes, soap, and
disposable towels, to be kept on-hand,
in the event of a chemical spill.
• Keep in mind that there may be more than
1 chemical used, and information on each
chemical should be assessed.
• Refuse to operate or work on the sprayer if
this information is not available!
• Before working on a sprayer system,
make sure that the system has been
triple rinsed and neutralized according
to the recommendations of the chemical
manufacturer(s) and that all the valves
have been cycled 3 times.
• Verify there is an adequate supply of clean
water and soap nearby, and immediately
wash off any chemicals that contact you.
71