Toro Multi Pro WM, Руководство оператора

Страница: 49 / 96

rate of the sprayer through the InfoCenter in the
A
UTOMATIC MODE
.
Note:
An icon for the application rate appears in
the display of the InfoCenter.
•
Press the sprayer-mode switch to the right to
control the application rate of the sprayer by hand
in the M
ANUAL MODE
.
Note:
When switching from the Automatic mode
to the Manual mode, the icon for the application
rate disappears from the display.
Switching between Sprayer Programming
Settings
g028507
Figure 66
1. Left and center
buttons—selecting
application rate 1 4. Center and right
buttons—selecting
application rate 2
2. Icon—application rate 1 5. Left and right
buttons—selecting
application rate boost
3. Icon —application rate 2 6. Icon —application rate
boost
•
To select application rate 1, press the left 2 buttons
of the InfoCenter (
Figure 66 ).
Note:
An icon appears.
•
To select application rate 2 (application rate),
press the right 2 buttons (
Figure 66 ).
Note:
An icon appears.
•
To temporarily apply a boost application rate,
press and hold the 2 outer buttons (
Figure 66 ).
Note:
An icon appears.
Note:
The application rate boost is an additional
percent above the active program (1 or 2)
application rate. Press and hold the buttons to
apply the boost application rate; release the
buttons to stop the boost rate.
Programming the Application Rate
and Application Rate Boost
HDX-Auto Model
Programming the Application Rate 1 and 2
1. From the Home screen, press the center
selection button to navigate to the Main Menu.
2. If needed, press the center selection button to
highlight the application rate for sprayer program
1 (
Figure 67 ).
Note:
The icon for sprayer application rate 1
looks like the numeral 1 in a circle to the right of
a bull's-eye target.
g028512
Figure 67
3. Press the right selection button to select sprayer
program 1 (
Figure 67 A).
4. Set the numerical value by pressing the following
selection buttons:
•
Press the right selection button ( Figure 67 B)
to move the cursor to the next numerical
position to the right.
•
Press the center selection button ( Figure
67 C) to increase the numerical value (0 to 9)
49