Toro Multi Pro 5700-D, Руководство по обслуживанию

Страница: 194 / 248

Rev. C
Multi Pro 5700--D Chassis
Page 7 -- 14
Planetary Wheel Drive Assembly
1. RH brake cable
2. Planetary assembly
3. Lug nut (8 used per wheel)
4. Tire and wheel assembly
5. Gasket
6. RH brake assembly
7. Flange head screw (4 used per brake)
8. Splined brake shaft
9. Retaining ring
10. O--ring
11. RH wheel motor (with speed sensor)
12. Flat washer (2 used per motor)
13. Cap screw (2 used per motor)
14. LH wheel motor
15. LH brake cable
16. LH brake assembly
17. Flange head screw (6 used per side)
Figure 13
60 ft--lb
(81 N--m)
1
2
3
4
5
12
13
14
15
16
6
7
8
9
10
11
10
17
60 ft--lb
(81 N--m)
70 to 90 ft--lb
(95 to 122 N--m)
NOTE:
The planetary wheel drive assembly can be ser-
viced with the planetary installed to machine (see Plane-
tary Wheel Drive Service in this section). Use the
following procedure to remove and install planetary
wheel drive assembly from machine.