Toro 78593, Руководство оператора, Страница: 8 / 20

6
Installing the Blower
Parts needed for this procedure:
1 Blower assembly
2 Bushing assembly
2
Carriage bolt (3/8 x 2-1/4 inches)
2 Locknut (3/8 inch)
1 Receiver hitch
1 Heat shield
2 Bumper
2 Thread-forming screw (1/4 x 1/2 inch)
1 Stop bracket
1 Carriage bolt (3/8 x 1 inch)
1 Nut (3/8 inch)
1 Washer
1 Spacer
1 Thread-forming screw (1/4 x 1-1/4 inch)
Procedure
1. Remove the air-cleaner cover and filter; refer to
the
Operator’s Manual for the machine.
2. Install the 2 bumpers on the heat shield ( Figure
8 ).
g256852
Figure 8
1. Heat shield 2. Bumper
3. Remove the top carriage bolt and nut securing
the muffler guard to the machine (
Figure 9 ).
g246215
Figure 9
1. Carriage bolt 3. Muffler guard
2. Nut
4. Loosely install the heat shield over the muffler
guard, with the tabs inside the muffler guard and
to the inside of the console tower, using the 2
thread-forming bolts (1/4 x 1/2 inch) and the
carriage bolt and nut you removed previously
(
Figure 10 ).
Important:
To minimize debris buildup on
the muffler, install the heat shield on the
machine when using the blower.
g256853
Figure 10
1. Carriage bolt 4. Heat shield
2. Nut 5. Thread-forming bolt—1/4
x 1/2 inch (2)
3. Drill here. 6. Tab (inside muffler guard)
8