
11.
Remove the spacer
g256854
Figure 32
1.
Thread-forming bolt (1/4 x
1-1/4)
3.
Spacer
2.
Washer
12.
Remove the heat shield (
Important:
Whenever you install the blower
on another machine, also install the heat
shield.
g256855
Figure 33
1.
Carriage bolt
3.
Heat shield
2.
Nut
4.
Thread-forming bolt (2)
13.
Install the carriage bolt and nut to secure the
muffler guard. Torque the bolt to 1978 to 2542
N∙cm (175 to 225 in-lb).
14.
Remove the fuel tank; refer to the
Operator’s
Manual
for the machine.
15.
Remove the 2 bolts and 2 nuts from the right
side of the machine and use them to install fan
guard (
). Torque the bolts to 37 to 45
N∙m (27 to 33 ft-lb).
g246823
Figure 34
1.
Nut (3/8 inch)
3.
Fan guard
2.
Bolt (3/8 x 1-1/4 inches)
16.
Install the fuel tank.
16