
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
2
Wheel Weight Kit (sold separately)
1
Install the Wheel Weight Kit (optional).
3
No parts required
–
Position the caster wheels.
4
No parts required
–
Remove the fan guard.
Idler pulley
1
Hex-flange head bolt
1
Spacer
1
Mounting bracket
1
Carriage bolt
2
Nut
3
5
Plate
1
Install the idler pulley.
Blower assembly
1
Bushing assembly
2
Carriage bolt (3/8 x 2-1/4 inches)
2
Locknut (3/8 inch)
2
Receiver hitch
1
Heat shield
1
Bumper
2
Thread-forming screw (1/4 x 1/2 inch)
2
Stop bracket
1
Carriage bolt (3/8 x 1 inch)
1
Nut (3/8 inch)
1
Washer
1
Spacer
1
6
Thread-forming screw (1/4 x 1-1/4 inch)
1
Install the blower.
Important:
Install the Low Flow Hydraulics Kit on your machine before installing this kit.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface.
2.
Lower the A-frame.
3.
Disengage the PTO, engage the parking brake,
and move the motion-control levers outward to
the N
EUTRAL
-L
OCK
position.
4.
Shut off the engine and remove the key.
5