Toro 46454, Руководство оператора

Страница: 10 / 28

Operation
Before Operation
Before Operation Safety
•
Never allow children or untrained people to
operate or service the machine. Local regulations
may restrict the age of the operator. The owner
is responsible for training all operators and
mechanics.
•
Keep your hands clear of the joint pivot areas
when handling the PTO driveshaft.
•
Do not step on, over, or under the PTO or
driveshafts.
•
Become familiar with the safe operation of the
equipment, operator controls, and safety signs.
•
Know how to stop the machine and shut off the
engine of the traction unit quickly.
•
Do not use PTO spline adapters or extensions.
•
Ensure that the guards and shields are properly
installed and maintained. Replace missing,
damaged, or worn guards and shields before using
the machine.
•
Ensure that the PTO driveshaft does not contact
the drawbar.
•
Inspect the area where you will use the machine
and remove all objects that the machine could
strike.
•
Ensure that your traction unit is suitable for use
with an implement of this weight by checking with
your traction unit supplier or manufacturer.
•
Shut off the machine, shut off the engine and
remove the key of the traction unit, and wait
for all moving parts to stop before making any
adjustments to the machine.
Understanding the Traction
Unit Controls
Familiarize yourself with the operation of the following
traction unit controls before operating the attachment:
•
PTO engagement
•
Three-point hitch (raise/lower)
•
Clutch
•
Throttle
•
Gear selection
•
Parking brake
Important:
Refer to the traction unit
Operator's Manual for operating instructions.
Connecting to a 3-Point
Hitch
Connecting the Lower Link Arms
1. Ensure that the attachment is positioned on a
level surface for installation.
2. Remove the hairpin cotters from the hitch pins.
g347648
Figure 7
1. Hairpin cotter (3) 2. Hitch pin (3)
3. Back the traction unit squarely up to the
attachment so that the lower connecting arms
can be attached to the frame.
4. Engage the parking brake, shut off the engine,
and remove the key from the ignition. Wait for
the engine and all moving parts to stop before
leaving the operator's seat.
Note:
For maximum ground clearance, install
the hitch pins in the lower mounting holes of the
hitch plate for the attachment.
5. Insert the right and left lower link arms onto the
hitch pins.
10