Toro 46454, Руководство оператора

Страница: 16 / 28

g347013
Figure 21
Left side shown
1. Jack 3. Pin
2. Side plate
4. Adjust the depth indicators on the inside of the
attachment to your desired operating depth
(
Figure 22 ).
g347014
Figure 22
1. 50 mm (1.9 inches) 4. 170 mm (6.7 inches)
2. 90 mm (3.5 inches) 5. 210 mm (8.3 inches)
3. 130 mm (5.1 inches) 6. 250 mm (9.8 inches)
5. Install the pins to the side plates.
6. Adjust the jacks at the front of the attachment.
On the jacks, an indicator strip shows the
operating depth. Ensure that the jacks and
depth indicators at the rear of the attachment
are set to the same depth.
Practicing the Operating
Procedures
Before using the attachment, find a clear area and
practice operating the traction unit with the attachment
installed.
Important:
If there are sprinkler heads, electrical
or communication lines, or other obstructions in
the area being aerated, mark these locations to
ensure that these items are not damaged during
operation.
•
Operate the traction unit using the recommended
gear settings and PTO drive speeds and become
thoroughly familiar with the traction unit handling
with the attachment.
•
Practice stopping and starting, raising the
attachment, lowering the attachment, disengaging
the PTO drive, and aligning the attachment with
previous passes.
Practice sessions helps you gain confidence in the
performance of the attachment and helps ensure that
you are using it properly.
WARNING
Adjusting or maintaining the attachment while
the traction unit is running may result in an
accident and severe injury or death.
• Before leaving the operator’s seat, engage
the parking brake, shut off the engine,
remove the key, and wait for all moving
parts to stop.
• Lower the attachment onto the storage
stands or appropriate blocking or
jacks before servicing or repairing the
attachment.
• Ensure that all safety devices are secured
in proper place before resuming operation.
During Operation
During Operation Safety
•
The owner/operator can prevent and is responsible
for accidents that may cause personal injury or
property damage.
•
Wear appropriate clothing, including eye
protection; long pants; substantial, slip-resistant
footwear; and hearing protection. Tie back long
hair and do not wear loose clothing or loose
jewelry.
•
Use your full attention while operating the
machine. Do not engage in any activity that
16