Toro 46454, Руководство оператора

Страница: 15 / 28

g345541
Figure 18
1. Gearbox input shaft 4. Bolt
2. Nut 5. PTO driveshaft
3. PTO shaft coupler
2. Assemble the PTO driveshaft to the PTO output
shaft of the traction unit.
g007328
Figure 19
1. PTO output shaft (traction
unit) 3. PTO driveshaft
2. PTO shaft coupler
3. Slide the PTO driveshaft forward as far as the
PTO output shaft allows.
4. Pull back on the locking collar of the PTO shaft
coupler to secure the PTO driveshaft. Slide the
PTO driveshaft back and forth to ensure that it
is locked securely.
5. Verify that the telescoping tube has a minimum
of 150 mm (6 inches) overlap when the
attachment is raised to the maximum height.
g345507
Figure 20
Adjusting the Operating
Depth
1. Install the attachment to the traction unit; refer
to
Connecting to a 3-Point Hitch (page 10) and
Connecting the PTO Driveshaft (page 12) .
2. Raise the attachment above the ground.
3. Pull out the pins from the plates on the sides of
the attachment (
Figure 21 ).
15