Toro 46454, Руководство оператора

Страница: 22 / 28

Checking the Gearbox Oil
Level
Service Interval: Before each use or daily
Every 50 hours
Gearbox-oil specification: SAE 90
1. Open the hatch; refer to Opening the Hatch
(page 21) .
2. Check the oil level in the gearbox.
The gearbox oil level should be at or above the
gauge centerline (
Figure 30 ).
g349301
Figure 30
1. Gauge centerline
Servicing the PTO
Service Interval: Yearly
Before each use or daily
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key from the traction unit.
2. Secure the attachment from movement.
3. Disconnect the PTO from the traction unit and
attachment.
4. Inspect the PTO components for damage;
replace any damaged or worn components.
5. Clean all interlocking components.
6. Reassemble the components.
7. Grease the PTO shaft ( Figure 31 ).
g007309
Figure 31
8. Grease the cylinders.
9. Assemble the PTO and mount it on the
attachment.
Checking the Knives
Service Interval: Every 100 hours
Check to ensure that the knives are not damaged
or crooked. You can use a hammer and an anvil to
straighten them, if needed.
If the knives are beyond repair, replace them.
Washing the Attachment
Wash the attachment as needed using compressed
air, if possible. Use water as little as possible to clean
the attachment. You may use a rag when washing
the attachment.
Important:
Do not use brackish or reclaimed
water to clean the attachment.
Important:
Do not use power-washing equipment
to wash the attachment. Power-washing
equipment may loosen important decals or wash
away necessary grease at friction points.
22