Toro 46454, Руководство оператора

Страница: 19 / 28

•
Keep all parts of the machine in good working
condition and all hardware tightened.
•
Replace all worn, damaged, or missing decals.
Removing the Attachment
1. Park the machine on a level surface with the
attachment in the raised position, engage the
parking brake, shut off the engine, and remove
the key from the traction unit.
2. Lower the attachment stands ( Figure 23 ).
g349300
Figure 23
1. Cotter pin 3. Hitch pin
2. Stand leg
3. Start the traction unit and carefully lower the
attachment to the ground. Shut off the engine
and remove the key.
4. Remove the PTO driveshaft from the attachment.
g345541
Figure 24
1. Gearbox input shaft 4. Bolt
2. Nut 5. PTO driveshaft
3. PTO shaft coupler
5. Remove the PTO driveshaft from the traction
unit.
g007328
Figure 25
1. PTO output shaft (traction
unit) 3. PTO driveshaft
2. PTO shaft coupler
6. Loosen the upper link jam nut and rotate the
upper link (
Figure 26 ) so that the attachment is
on the stand legs and on level ground.
g347650
Figure 26
1. Upper link arm 3. Hairpin cotter
2. Jam nut 4. Link pin
7. Remove the upper link arms.
8. Remove the lower link arms ( Figure 27 ).
Important:
Ensure that the attachment does
not slide off the traction unit and cannot roll
away.
19