1
Removing the Blower from the
Crate
No Parts Required
Procedure
Use the instructions in Procedure 1 to simplify the removal
of the blower from the crate.
Important:
Before the blower frame is unbolted from
the shipping crate or the crate is removed, make sure to
install the jack stand to help stabilize the blower.
1.
Remove the top of the crate (Figure 3).
1
2
3
4
G021672
Figure 3
1.
Top of crate
3.
Top of machine
2.
End of crate
4.
Board under blower
housing
2.
Remove the end of the crate which is toward the top
of the machine (Figure 3).
3.
Remove the board that is under the blower housing
(Figure 3).
4.
Secure a strap to the top end, 2 x 4, deckboard and
lift the pallet until the crate and blower is standing up
vertically (Figure 4).
G021673
1
2
Figure 4
1.
Lift strap
2.
Top end, 2 x 4, deckboard
5.
Remove the snapper pin securing the jack stand tube to
the storage tube (Figure 5). Remove the jack assembly
from the storage position.
G
021674
1
2
Figure 5
1.
Snapper pin
2.
Jack stand tube
6.
Remove the strap from the pallet and attach it to the
lift loop on the blower (Figure 6). Lift the blower until
the strap is tight.
7
