Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Remove the blower from the crate
Drive shaft assembly
1
Roll pin
1
Bolt, 5/16 x 1-3/4 inch
2
2
Lock nut, 5/16 inch
2
Install the drive shaft to the blower gear
box shaft
Mounting plate
1
Bolt, 1/2 x 1-1/4 inches
4
3
Lock nut, 1/2 inch
4
Install the mounting plate to the debris
blower frame
Debris blower assembly
1
Locking pin
1
4
Hair pin cotter
1
Mount the blower to the traction unit
Proximity switch assembly
1
Sensor plate
1
Carriage screw, 5/16 x 1–1/4 inch
2
5
Flange nut, 5/16 inch
2
Install the proximity switch
6
General Purpose Lithium Base Grease
A/R
Grease the machine
Media and Additional Parts
Description
Qty.
Use
Parts Catalog
1
Operator's Manual
1
Read before operating.
Operator Training Material
1
View before operating the machine
Certificate of Compliance
1
Ensure CE compliance.
Note:
Determine the left and right sides of the machine
from the normal operating position.
Note:
To install and operate the debris blower, the traction
unit must be a 4 Wheel Drive machine which is equipped
with the Front Quick Attach Front Frame, Model 30509 and
one of the following; the Electric Accessory Kit, part no.
115–0019 or the Joystick Kit, model 31219.
6
