6
1
5
4
3
G02391
1
2
Figure 9
1.
Roll pin
4.
Bolts, 5/16 x 1–3/4 inch
2.
Safety chain (2)
5.
Lock nuts, 5/16 inch
3.
Drive shaft
6.
Gear box shaft
3.
Secure them with a roll pin (Figure 9).
4.
Secure the drive shaft to the gear box shaft with two
5/16 x 1–3/4 inch bolts and 5/16 inch lock nuts
(Figure 9).
5.
Torque the bolts and lock nuts to 18 to 25 N-m (175
to 225 in-lb).
6.
Remove the cable tie keeping the drive shaft together
7.
Secure the safety chain to blower frame (Figure 9).
3
Installing the Mounting Plate
to the Debris Blower Frame
Parts needed for this procedure:
1
Mounting plate
4
Bolt, 1/2 x 1-1/4 inches
4
Lock nut, 1/2 inch
Procedure
1.
Remove the bolts securing the mounting plate to the
crate (Figure 10).
G021682
1
Figure 10
1.
Mounting plate
2.
Install the mounting plate to the debris blower frame
with (4) 1/2 x 1-1/4 inch bolts and (4) 1/2 inch
locknuts (Figure 11). Use the lower set of holes on
each side of the mounting plate when installing. Torque
the bolts to 92 to 113 N-m (68 to 82 ft-lb)
G021677
1
2
3
Figure 11
1.
Mounting plate
3.
Locknut (4)
2.
Bolt (4)
9
