Maintenance
Lubrication
Service Interval:
Every 50 hours
The debris blower has bearings and bushings that must
be lubricated regularly. If the machine is operated under
normal conditions, lubricate bearings with No. 2 general
purpose lithium base grease after every 50 hours of operation.
Lubricate fittings immediately after every washing, regardless
of the interval listed.
The lubrication points are as follows:
Drive pulley (Figure 21)
G021632
Figure 21
Shown with cover removed
Castor wheel shaft (2) (Figure 22)
Figure 22
Drive shaft (Figure 23)
G021633
Figure 23
Checking the Gear Box
Lubrication
Service Interval:
Every 50 hours
1.
Position the machine and blower on a level surface and
lower the blower.
2.
Remove the (5) screws and washers securing the gear
case cover to the blower (Figure 24).
1
2
3
4
G022000
Figure 24
1.
Cover
3.
Screw
2.
Washer
4.
Gear box
3.
Remove the cover to expose the blower gear case
(Figure 24).
4.
Remove the check/fill plug from the side of the gear
box (Figure 25).
16
