Toro 41188, Руководство по обслуживанию

Страница: 176 / 353

Multi Pro 1750 Page 6 − 2 Spray System
Specifications
Item Description
Spray Pump 6−Diaphragm, Positive Displacement Pump
Maximum Flow Rate of 45 GPM
Spray Pressure Relief Valve Poppet Style, 218 PSI (15 Bar) Maximum
Sprayer Tank 175 Gallon, Polyethylene
Suction Strainer 50 Mesh (Blue), Stainless Steel, Tank Mounted
(30 Mesh (Red) and 80 Mesh (Green) Optional)
Pressure Filter (Serial Number Above 315000000) 80 Mesh, Agitation Manifold Mounted
General Information
Operator’s Manual
The Operator’s Manual provides information regarding
the operation, general maintenance and maintenance
intervals for your Multi Pro machine. Refer to that publi-
cation for additional information when servicing the ma-
chine.
Precautions Concerning Chemicals Used in Spray System
Chemicals can injure persons, animals, plants, soil and
other property. To eliminate environmental damage and
personal injury:
1. Select the proper chemical for the job.
2. Carefully read the directions printed on the chemical
manufacturer’s labels before handling chemicals. In-
structions on chemical manufacturer’s container labels
regarding mixing proportions should be read and strictly
followed.
3. Keep spray material away from skin. If spray material
comes in contact with a person, wash it off immediately
in accordance with manufacturer’s recommendations
(refer to container labels and Material Safety Data
Sheets).
4. Always wear protective clothing, chemical resistant
gloves, eye protection and other personal protective
equipment as recommended by the chemical manufac-
turer.
5. Properly dispose of chemical containers, unused
chemicals and chemical solution.
Precautions for Removing or Adjusting Spray System Components
1. Stop the vehicle and set the parking brake.
2. Shut off the vehicle’s engine and remove the key
from the ignition switch.
3. Disengage all power and wait until all moving parts
have stopped.
4. Remove chemicals from pump, hoses and other
spray components. Thoroughly neutralize and rinse
spray system before loosening or removing any spray
system component(s).
5. Make sure system pressure is relieved before loos-
ening any system component (e.g. spray valves, spray
system hose).