Figure 35
1.
Fuel shut-off valve
2.
Clamp
Replacing the Fuel Filter
Service Interval:
Every 200 hours
Never install a dirty filter if it is removed from the fuel
line.
Note:
Note how the fuel filter is installed.
Note:
Wipe up any spilled fuel.
1. Disengage the PTO and set the parking brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Close fuel shut-off valve at fuel tank (Figure 35).
Note:
Remove the fuel line from the fuel valve that
is closest to the engine.
4. Squeeze the ends of the hose clamps together and
slide them away from the filter (Figure 36).
Figure 36
1.
Hose clamp
3.
Filter
2.
Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps close
to the filter.
7. Open fuel shut-off valve at fuel tank (Figure 35).
8. Check for fuel leaks and repair if needed.
29
Содержание 39094
