Toro 34242, Руководство оператора

Страница: 18 / 60

Operation
Note:
Determine the left and right sides of the
machine from the normal operating position.
Before Operation
Before Operation Safety
•
Evaluate the terrain to determine what accessories
and attachments are needed to properly and
safely perform the job. Only use accessories and
attachments approved by Toro.
•
Inspect the area where the machine is to be
used and remove all rocks, toys, sticks, wires,
bones, and other foreign objects. These can be
contaminated by chemicals, thrown, or interfere
with the operation of the machine and may cause
personal injury to the operator or bystanders.
•
This machine was designed for one operator only.
Do not carry passengers.
•
Wear appropriate personal protective equipment
such as safety glasses, long pants, substantial
slip-resistant footwear, and hearing protection. Tie
back long hair and avoid loose clothing and loose
jewelry which may get tangled in moving parts.
•
This machine produces sound levels in excess of
85dBA at the operator’s ear and can cause hearing
loss through extended periods of exposure. Wear
hearing protection when operating this machine.
•
Check that the following items are in place and in
proper working condition: the operator presence
controls, safety switches, guards, and shields. Do
not operate the machine unless they are in proper
working condition. Replace worn or deteriorated
parts with genuine Toro parts when necessary.
DANGER
It is essential that operator safety
mechanisms be connected and in proper
operating condition prior to use.
Shut off the engine, remove the key, and
wait for all moving parts to stop before
leaving the operating position. When the
key is turned to the OFF position, the
engine should shut off. If not, stop using
the machine immediately and contact an
Authorized Service Dealer.
•
Do not operate the machine when people,
especially children, or pets are in the area. Shut
off the machine and attachment(s) if anyone enters
the area.
•
Do not operate the machine without the safety
devices in place and in proper working condition.
Components are subject to wear, damage and
deterioration, which could expose moving parts
or allow objects to be thrown. Frequently check
for worn or deteriorating components and replace
them with the manufacturer’s recommended parts
when necessary.
•
Do not fill, calibrate, or clean the machine when
people, especially children, or pets are in the area.
•
Check all sprayer components for wear and leaks
before applying pressure to the system. Do not
use if leaking or damaged.
•
Make sure the operator platform is clean and free
from chemical residue and debris buildup.
18