thin coating of engine oil on the surface of the
rubber seal. Turn filter clockwise until rubber
seal contacts the filter adapter then tighten filter
an additional 1/2 to 3/4 turn.
6.
Clean around oil fill cap and remove cap. Fill to
specified capacity and replace cap.
7.
Use oil recommended in the
section.
Do not
overfill. Start
the engine and check for leaks. Stop engine and
recheck oil level.
8.
Wipe up any spilled oil from engine deck
mounting surfaces.
9.
Lower and latch the hopper into operating
position.
Fuel System
Maintenance
Check Fuel Filter and Tank
Service Interval:
Before each use or daily
1.
Stop engine, wait for all moving parts to stop,
and remove key. Engage parking brake.
2.
Check the fuel filter and tank for leaks. See
engine owner’s manual.
45
Содержание 34242
Страница 8: ...decal146 0776 146 0776 8...
Страница 59: ...Schematics g402879 Electrical Schematic Rev B 59...
