pump. If wheels rotate slowly, the system may
prime after additional running. Check oil level
as described in
.
7.
Allow the machine to run several minutes
after the charge pumps are “primed” with drive
system in the full speed position. Check oil level
as described in
.
8.
Check hydro drive linkage adjustment.
Maintaining the Chassis
Check for Loose Hardware
Service Interval:
Before each use or daily
1.
Stop engine, wait for all moving parts to stop,
and remove key. Engage parking brake.
2.
Visually inspect machine for any loose hardware
or any other possible problem. Tighten hardware
or correct the problem before operating.
52
Содержание 34242
Страница 8: ...decal146 0776 146 0776 8...
Страница 59: ...Schematics g402879 Electrical Schematic Rev B 59...
