Procedure
Description
Qty.
Use
Tee fitting (Model 30812 only)
1
Hose clamp (3/8 inch)
3
4
Cable tie
4
Install the hydraulic hoses.
Relay bracket
1
Relay
6
Bolt (1/4 x 1/2 inch)
6
Nut (1/4 inch)
7
Bolt (1/4 x 3/4 inch)
1
Decal (from Auxiliary Power Unit Kit)
1
5
Switch
2
Install the relays and switches (for
Model 30810 only).
Relay bracket
1
Relay
6
Bolt (1/4 x 1/2 inch)
6
Nut (1/4 inch)
7
Bolt (3/8 x 2 inches)
1
Washer (0.406 inch)
1
Nut (3/8 inch)
1
Bolt (1/4 x 1/2 inch)
6
Locknut (1/4 inch)
6
Decal (from Auxiliary Power Unit Kit)
1
6
Switch
2
Install the relays and switches (for
Model 30812 only).
7
Wiring harness
1
Install the wiring harness.
8
No parts required
–
Complete installation.
1
Preparing the Machine
No Parts Required
Procedure
1.
Park the machine on a level surface, lower the cutting
unit, stop the machine, engage the parking brake, and
remove the key from the ignition switch.
CAUTION
If you leave the key in the ignition switch,
someone could accidently start the engine and
seriously injure you or bystanders.
Remove the key from the ignition switch
before you do any maintenance.
2.
Disconnect the negative (–) battery cable from the
battery.
2