
Form No. 3395-750 Rev B
Rear Quick-Attach System
2013 and After Groundsmaster
®
7200 Series Mower
Model No. 30810—Serial No. 315000001 and Up
Model No. 30812—Serial No. 315000001 and Up
Installation Instructions
Note:
The machine must be equipped with the Auxiliary Power Unit Kit, Toro part no. 30382.
WARNING
CALIFORNIA
Proposition 65 Warning
This product contains a chemical or chemicals known to the State of California to
cause cancer, birth defects, or reproductive harm.
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
Description
Qty.
Use
1
No parts required
–
Prepare the machine.
Cylinder-support assembly
1
Bolt (3/8 x 2-3/4 inches)
2
Bolt (3/8 x 1-1/4 inches)
3
Bolt (3/8 x 1 inch)
1
Nut (3/8 inch)
3
Lift-arm assembly
1
Bolt (7/8 x 4-1/2 inches)
2
Jam nut (7/8 inch)
2
Spindle washer
8
Bolt (1/2 x 1-1/2 inches)
1
Locknut (1/2 inch)
1
Cylinder-mount pivot pin
1
2
Grease fitting
1
Install the lift-arm assembly (for Model
30810 only).
Link mount
1
Bolt (3/8 x 1 inch)
3
Nut (3/8 inch)
3
Lift-arm assembly
1
Bolt (7/8 x 4-1/2 inches)
2
Jam nut (7/8 inch)
2
Spindle washer
8
Bolt (1/2 x 1-1/2 inches)
1
Locknut (1/2 inch)
1
Pivot pin
1
3
Grease fitting
1
Install the lift-arm assembly(for Model
30812 only).
© 2015—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3395-750* B