Toro 22308, Руководство оператора

Страница: 21 / 40

21
5.
If the attachment uses hydraulics, slide the collar back
on the hydraulic couplers and disconnect them.
6. Install the protective covers onto the hydraulic
couplers on the traction unit.
7. Start the engine, tilt the mount plate forward, and back
the traction unit away from the attachment.
Securing the Traction Unit for
Transport
Important
Do not operate or drive the traction unit on
roadways.
Important When transporting the traction unit on a
trailer, always use the following procedure:
1. Lower the loader arm.
2.
Stop the engine.
3. Set the parking brake.
4.
Secure the traction unit to the trailer with chains or
straps using the tie-down/lift loops at the front and rear
of the traction unit (Fig. 28 and 29).
m–7462
1
Figure 28
1. Front tie-down loops
m–7463
1
Figure 29
1. Rear tie-down loops
Lifting the Traction Unit
You can lift the traction unit using the tie-down/lift loops
as lift points (Fig. 28 and 29).