Toro 130-5615, Руководство по установке

Страница: 13 / 20

Figure 36
1. Left headlight 3. Lower headlight support
2. Flanged-head bolts (1/4 x
5/8 inch) 4. Front of the machine
4. Align the holes in the tank-support bracket with the
holes in the lower headlight support (
Figure 37 ).
Figure 37
1. Flanged-head bolts (1/4 x
5/8 inch) 3. Holes (lower headlight
support and left fender
liner)
2. Hole (tank-support
bracket—MD-series
models)
5. Assemble the tank-support bracket to the lower
headlight support with 2 flanged-head bolts (1/4 x 5/8
inch) that you removed in step
3 ( Figure 37 ).
6. Torque the 2 bolts to 79 to 147 N∙cm (7 to 13 in-lb).
Connecting the Hose to the Wiper
1. At the overhead console, route 1 end of the hose (3/16
inch) through the hole in the overhead console (
Figure
38 )
Figure 38
1. Hole (overhead console) 4. Barbed hose fitting
2. Bulb seal 5. Hose (wiper arm)
3. Hose (3/16 inch)
2. Insert the small end of the barbed hose fitting into the
end of the hose from the wiper arm until the fitting
fully seats (
Figure 38 ).
3. Insert the large end of the barbed hose fitting to the
end of the hose (3/16 inch) until the fitting fully seats
(
Figure 38 ).
Routing the Hose
1. Route the hose (3/16 inch) to the left of the overhead
console along the bulb seal at the front of the cab
frame (
Figure 39 ).
Figure 39
1. Hose (3/16 inch) 4. Pillar A (driver’s side)
2. Hole (overhead console) 5. Front of the machine
3. Bulb seal
2. Route the free end of the hose into the opening at
the top of pillar A (driver’s side) of the cab frame and
13