Tornatech GPD Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 61

Tornatech GPD Скачать руководство пользователя страница 49

49

Service

Informations on how to reach technical support, concerning the commissioning date, the last service date and the
next service due date is available on this page. It is the client responsibility to make sure that the proper
maintenance is done on the controller. A reminder for th

e “Service” can be selected from these options: OFF, ½

year, 1 year, 1 ½ years, 2 years and 3 years. The next service will be determined using the last service and the
chosen service interval. This service must be done by an accredited technician.

A prope

r password must be enter for the “Service Done” button to be available. This button should only be pressed

by an authorized person after a completed service.

The “Live View” page is where the user can grant or refuse the remote access demands.

The “Nameplate Information” page contains all the information found on the nameplate.

The Jockey Pump Cut-Out and Cut-In can be set on this page.

It is possible to install a custom Service card on this page. Contact Tornatech for more information.

Service

«
...
47
48
49
50
51
...
»

Содержание GPD






























































Отзывы:

Нет отзывов