Tornatech GPD, Руководство по установке и обслуживанию, Страница: 15 / 61

15
Press “Engine First Startup” and turn the Main Selector Switch to the “HAND” position.
Note: Before starting the engine, verify that the engine has been officially commissioned (by an authorized engine
representative or service dealer) and that the exhaust pipe is connected properly.
Note: You can choose to skip this step completely by selecting “Skip engine validation step”. This selection will be
recorded in the logs.
- Press on one or both of the green crank buttons to start the engine.
- With the engine started and running, a timer will start counting.
Note: You can choose to bypass the timer by pressing the “Skip” button. This selection will be recordred in the logs.
- During this time, the controller will verify that no alarms are detected. If an alarm appears, stop the engine by
pressing the “STOP” button and then place the Main Selector switch to the OFF position. Take appropriate action to
resolve the alarm that has appeared. Do not stop the engine only by turning the Main Selector switch to
the “OFF”
position. If no alarms are detected by the expiration of the timer, stop the engine by pressing the “STOP” button and
then place the Main Selector switch to the OFF position.
To continue to next step, press “ ˂ First Start Up “.