
8
Warning symbol.
Read carefully the sections marked with
this symbol, for the security of both the
operator and the machine.
BEFORE USE
HANDLING OF THE PACKED MA-
CHINE
The machine is supplied with suitable
packing.
The total weight is 221 lbs. (100 kg)
Packing dimensions:
Base: 33” x 22” (84,5 cm x 57 cm)
Height: 33” (85 cm)
ATTENTION:
Do not stack more than 2 machines.
UNPACKING THE MACHINE
1. Remove the outer package.
2. Loosen the two screws that hold the
two brackets to the machine.
3. Remove the screws that hold the
brackets to the pallet and remove the
brackets.
4. Rotate the handle bar into working
position (see under “MOVEMENTS OF
THE HANDLE BAR”) lower the machine
from the pallet and push it forwards on
the wheels, tilting the machine back
-
wards to avoid damaging the mechani
-
cal parts.
MOVEMENT OF THE HANDLE BAR
The handle bar arrives in the closed
position.
To rotate the handle bar into one of the
different working positions:
1. Pull up the release lever (1) near the
handle bar.
2. Rotate the handle bar into the work
-
ing position while holding the release
lever (1).
3. release the release lever (1) to lock
the handle bar.
Use the same procedure for further
height adjustment of the handle bar in
order to find the most comfortable work
-
ing position.
BATTERY CONNECTIONS
This machine is supplied with two bat
-
teries already connected, placed in the
appropriate compartment under the
recovery tank. In case the batteries
need to be replaced, please contact the
authorized technical assistance.
The replacement batteries must have
the identical performance as the ones
already installed.
2 batteries AGM 12V 34Ah5.
With the connector (2) it is possible to
connect or disconnect the batteries.
BATTERY CHARGING
The label with the indication “AGM”
placed on the frame in the rear part of
the machine, identifies that the machine
is equipped with AGM batteries and a
suitable battery charger.
Switching on the machine using the ON/
OFF switch (3), in the rear part of the
machine the charge level of the batteries
(4) is visible.
A: green led on = batteries charged.
B: orange led on = batteries almost dis-
charged.
C: red led on = complete discharge of
the batteries.
When the led of the charger becomes
red (C), the led of the ON/OFF switch
(3) becomes red also. This will cause all
functions of the machine to be shut off.
During the charging operation the ma-
chine’s functions are disabled.
To charge the batteries, park the ma-
chine on a level surface near a single-
phase socket. Switch off the machine
at the on/off switch (3). Connect the
charging cable, supplied with the ma
-
chine, to both the machine (5) and to the
outlet socket as indicated in the figure.
At the end of the charging phase, re-
move the charging cable. The charge
phase is complete only when the green
led (A) on the charger comes on
ATTENTION:
In order not to cause permanent dam-
age to the batteries, never leave them
completely discharged. If the machine
is not to be used for more than two
weeks, disconnect the battery connector
(see under “CONNECTION BATTER-
IES”).
ATTENTION:
Never charge batteries with a non-suit
-
able charger. Strictly follow the instruc
-
tions supplied by the batteries and
charger manufacturer.
BATTERIES DISPOSAL
It is mandatory to dispose of exhausted
batteries, classified as dangerous waste,
to an authorized institution according to
the current laws.
Содержание 99617
Страница 3: ...3 NOTES...