
10
Rotate the squeegee to the right or
to the left (see under “COMPLETE
SQUEEGEE ROTATION”) to bring it to
the front.
By pushing down on the handle, lift the
machine slightly (2) and move onto the
surface to dry (3).
ATTENTION:
When the machine is lifted, release the
handle bar levers to stop the brush rota-
tion avoiding water splashing.
Proceed backwards to dry the surface
just washed (4).
SQUEEGEE LIFTING
To lift the squeegee, lift the lever (5) situ-
ated ion the rear of the handle bar.
It is only possible to lift the squeegee
when it is situated close to the center
point. If the squeegee is not close to the
center point, even moving the lever (5) it
will not lift the squeegee assembly.
ATTENTION:
During normal operation, the lifting lever
of the squeegee must be kept in the
down position.
HANDLE BAR ADJUSTMENT
When approaching obstacles or near
walls, it is possible to simplify the han
-
dling of the machine by adjusting the
handle bar more vertically with respect
to the machine.
To rotate the handle bar:
1. Lift the release lever (8) near the
handle bar.
2. Rotate the handle bar into the new
working position keeping the release
lever (8) pulled.
3. Release the lever (8) to lock the
handle bar in the desired position.
Once the obstacle has been passed
repeat the operation to return to the
previous working position.
This operation is also possible with the
machine in motion while maintaining
pressure on the release lever.
OVERFLOW DEVICE
In order to avoid damage to the vacuum
motor, the machine is equipped with a
float that closes off the suction when
the recovery tank is full. When this
happens, it is necessary to empty the
recovery tank.
1. Hold the exhaust hose (9) of the
recovery tank.
2. Remove the exhaust plug and empty
the recovery tank into appropriate con-
tainers, according to the standard norms
for liquid disposal.
ATTENTION:
This operation must be carried out using
gloves to protect from contact with dan-
gerous solutions.
STOPPING THE MACHINE AFTER
CLEANING OPERATION
Before carrying out any type of mainte-
nance:
1. Switch off the on/off switch (1).
2. Lift the squeegee by rotating the
lever (5), placed in the rear center of the
handle bar, up (see under “SQUEEGEE
LIFTING”).
3. Move the machine to an appropriate
place for tank draining.
Содержание 99617
Страница 3: ...3 NOTES...