
14
PROGRAMMED MAINTENANCE
REQUIRED ACTION
DAILY
WEEKLY
ORDINARY/MONTHLY
RECOVERY TANK CLEANING
•
SUCTION FILTER CLEANING
•
BRUSH CLEANING
•
BRUSH REMOVAL
•
SQUEEGEE ASSEMBLY CLEANING
•
FRONT SQUEEGEE RUBBER REPLACEMENT
• if required
REAR SQUEEGEE RUBBER REPLACEMENT
• if required
SQUEEGEE HOSE CLEANING
•
SOLUTION TANK CLEANING
•
SOLUTION FILTER CLEANING
•
RECOMMENDED BRUSHES
Brushes must be chosen depending on the type of floor and the dirt to be removed.
The material and the bristle diameter are the elements that distinguish different types of brushes.
MATERIAL
CHARACTERISTICS
PPL (Polypropylene)
Good wear resistance. Maintains characteristics with hot water up to 140°F (60°C). It is not
hygroscopic.
TYNEX
Nylon bristles with grains of abrasive material. Use with caution in order not to mark the floor
or ruin the finish.
BRISTLES THICKNESS
Thicker bristles are more rigid and must be used on smooth floor or floor with small joints. On
irregular floors with deep joints or relieves, softer bristles penetrate more easily and deeper.
Please be aware that when brush bristles are worn out they become rigid and unable to pen
-
etrate and clean deeper. This may also cause brush vibration with thicker bristles
PAD HOLDER
Pads are recommended to clean smooth surfaces. The pad holder has anchor points to retain
the pad. It is important that the height of the pad holder with its pad is the same as the one of
the brush.
MACHINE
PART NO. QTY DESCRIPTION
USE
BD 17/6
48903130
1
Brush PPL 0,9 Ø 430
Floors of resistant material and particularly
dirty.
48903150
1
Brush 5-mix Ø 430
For all types of floors.
48803050
1
Pad holder Ø 425 + center lock green
For pads of 17”, for smooth surfaces cleaning.
Содержание 99617
Страница 3: ...3 NOTES...