TECHNICAL DOCUMENT
6. Put the ATC mounting bracket on the standoff's threaded studs as shown in the following image.
Figure 5: ATC mounting bracket moving on to the four standoffs.
Note:
Verify that the tilt standoff's eccentric cam fits into the large slot on the ATC mounting
bracket.
7. Secure the bracket by reinstalling the washers and flange nuts that you removed in Step 2 with a 13 mm
socket.
8. Pull the bracket toward the front of the machine. You'll make adjustments to the location of the bracket
later in this procedure, but we recommend starting with it moved forward.
Install the Main Assembly
1. Remove the four preinstalled M8 × 1.25 - 16 mm socket head cap screws and washers from the bottom of
the ATC electrical cabinet. Then, set all aside for later use.
CAUTION!
Team Lift Required: You must have the aid of more than one person to lift and move the
object. The object is heavy, and lifting it by yourself can cause serious injury.
Page 8
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)