TECHNICAL DOCUMENT
Install the Air Cylinder
1. Attach the air cylinder on to the ATC main assembly.
Figure 2: Putting the air cylinder into the ATC main assembly.
2. Secure the air cylinder to the ATC main assembly with a 12 mm hex wrench (provided) and two M14 × 20
mm socket head cap screws.
Figure 3: Putting the air cylinder hardware into the air cylinder.
3. Connect the air lines from the ATC main assembly to the air cylinder as follows:
l
Connect the short air line to the front of the cylinder.
l
Connect the long air line to the back of the cylinder.
Page 6
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)
