TECHNICAL DOCUMENT
4. Load a tool into the spindle:
a. Push and hold the drawbar open button on the side of the ATC.
Figure 15: Drawbar open button on the side of the ATC.
The drawbar opens.
b. Load a tool into the spindle.
c. Release the button.
The drawbar closes.
5. From the PathPilot interface, on the
Main
tab, in the
RPM
DRO field, type
1000
. Then select the
Enter
key.
6. Select
FWD
.
The spindle starts.
Page 17
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)
