TECHNICAL DOCUMENT
2. Power on the machine and the PathPilot controller.
a. Turn the Main Disconnect switch to
ON
on the side of the electrical cabinet.
b. Twist out the Emergency Stop button on the operator box, which enables movement to the machine axes
and the spindle.
c. Press the Reset button on the operator box.
d. Bring the machine out of reset and reference it.
3. Verify that the ATC is all the way forward (toward the spindle), and then slowly move the Z-axis down (-Z) to
examine the clearance of the carousel door opening.
4. Verify that the carousel door opening is approximately equal to the front back and left of the spindle
mounting flange:
l
If the carousel door opening is approximately equal, go to Step 8.
Figure 11: Distance between the carousel door opening and the spindle mounting flange.
l
If the carousel door opening must be adjusted, go to Step 5.
Page 13
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)