TECHNICAL DOCUMENT
4. Click
Retract
.
Figure 2: Retract button on the ATC tab.
The tray returns to the machining position.
Automatically Unload a Tool From the Tool Tray
Note:
Typing a new tool number in the
Tool
DRO field doesn't remove the tool from its tray assignment.
1. From the PathPilot interface, on the
ATC
tab, type the tool number in the
Remove
DRO field. Then select the
Enter
key.
Figure 3: Remove DRO field on the ATC tab.
2. Select
Remove
.
The ATC fetches the tool from the tray.
3. Unload the tool from the spindle.
Page 23
©Tormach® 2020
Specifications subject to change without notice.
tormach.com
TD10627: Owner's Guide: 770MX Automatic Tool Changer (ATC) (1220A)
