Topsoaring New Technology Co., LTD
Top Sky DLG Install Guide
TopskyInstallGuide-(English version).doc
Page 19 of 40
2.19.
Bond the screw tube on to the wing. And assemble the wing on the fuselage with two screws.
Slightly loosen the screws when the epoxy is half cured.
2.20.
After the wing’s cure, sand the screw tube to make them flush with the wing.
2.21.
Locate the finger peg position as you like. We suggest it be on the center line of the carbon wing
beam, and 10mm to the outside edge of the wing tip. Drill 6mm holes on the holder location.
2.22.
Bond the peg into the wing with epoxy.
