Toppro T2208, Руководство пользователя, Страница: 40 / 52

Fader
Calibration
DSP Control
Default setting restores all the settings you have made to default.
This icon determines the page display to you when you turn on the mixer. Touch
Long Fader, you will see Long Fader page first, while select Mixer Mode will show
you Mixer page first.
This is for a new function that you
can quickly control Matrix level at
one interface. AUX1-8, DCA1-6,
and main gains are included. The
interface is shown as below.
To lock the machine interface at the Matrix control, compared to the “Mixer
Lock”, passwords are same. But the control interface locked is different.
At the lower right corner, you can see instruction of the DSP firmware.
Touch this button to lock the system. Once locked, you must input your password to
unlock it. Default password is “1111”. Super password is “2208”, which means you
can tap it to unlock your T2208 every time you forget your password. Please note
messages on the screen when operation.
Touch this button to change password of the system. Input an old password and a
new password. The system will save the new one as current password. Please note
messages on the screen when operation.
On system interface, click fader
calibration to enter motor speed
adjustment interface as . when “Too
fast” key red light lit, click “Slower” key
to slow it down. When “Too slow” lit,
click “Faster” key to speed up; When
“Normal” key lit in green for more than
1 min, OK, click “Save/Exit” to save and
exit.
Default Setting
Install Matrix
Install Matrix Page
Fader Calibration Page
T1DSP_Firmware_1_V1.0
T1DSP_Firmware_2_V1.0
T3MCU_Firmware_1_V1.0
T0MCU_Firmware_2_V1.0
All Faders
-10.5dB
DCA
1
System
Main
1 8
Status
Locked
2 3 4 5 6 7
DCA
2
DCA DCA
4
Podium Name
3
Name Name
DCA
5
Name
DCA
6
Name
Aux Name Aux Name Aux Name Aux Name Aux Name Aux Name Aux Name Aux Name
Venue Scene 1
Restore Scene
Lock Matrix
Lock
Mixer
Password
Setting
MotorStatus(Move Up)
PWM Width: 32%
Fast Normal Slow
100mm/230ms =>Normal Speed<= 100mm/270ms
Speed: 100mm/260ms
MotorStatus(Move Down)
PWM Width: 32%
Fast Normal Slow
Speed: 100mm/260ms
Speed Up
Speed Down
Speed Up
Speed Down
Save/Exit
40
6