Toppro T2208, Руководство пользователя, Страница: 36 / 52

Press one of these buttons DCA1-6 either the panel or screen, this will light indicating
it is ready to be edited either to add or delete channels.
Each DCA group can be renamed as needed. For it you only have to touch the
respective box DCA holding it down until the screen shows you the keyboard. This action can also
be made from the pages of “Long Faders” or “Mixer”.
To select channels touch the box corresponding to the
desired channel and that box will change color indicating
that the channel was added. In the same way to remove a
channel of a group, touch the channel box and this will
turn off indicating their elimination.
After you edit the DCA group, press the "DCA Set" button which is blinking, either on
screen or panel. Repeat the above steps to edit other DCA groups. Each group may be
assigned repeatedly channels, for example channel 3 could belong to DCA1 and DCA2 at the
same time, etc.
After selection finished, the system will return to the page "Mixer" automatically, in which page
you can operate selected group. You can slide fader on the left of screen to increase or decrease
the channel fader levels (not volume) in proportion at the same time, or by rotating the
corresponding knob to control the level.
Pressing this button a warning box will be displayed on the screen, which must be
confirmed if you desired clean the channel selection of the respective DCA group.
Touch these icons to enter corresponding page.
DSP Control
Drums
Drums
DCA1
0
-10dB
0
-10dB
0
-10dB -10dB
00
Ch02 Ch03 Ch04 Ch01
DCA Set
DCA Clear
Back
To
MIXER
Back
To
Previous
System
36
6