Toppro T2208, Руководство пользователя, Страница: 16 / 52

Control
28. FX1/FX2 send
Press the input channel and then press this
button, can assign the channel to use FX1/FX2
effects. And the default level is mute, so you
should tune the knob below the button to take
effects.
29. Aux1-4/Aux5-8 sends
Press the input channel and then press this
button, can assign the channel to use
AUX1-4/5-8. And the default assigned level is mute, so you should tune the knob below the
button to take effects.
30. Main button
The selected channel can be assigned to Main Outputs by pressing the
corresponding button.
The main 20 inputs, USB In, and FX1-2 can be assigned to any or all of the Aux
Sends and the main outputs.
The 8 aux sends cannot be assigned to the main outputs.
31. AUX1-4/5-8 Output Level Control knobs
These knobs here control the output level for AUX1-4/5-8.
32. UP &Left & Down & Right button
These buttons move the cursor around the display page,
or select and delete parameters and options. Sometimes,
Up button function is the same as Left button, while
Down button function is the same as Right button. But in
GEQ, Up and Down adjust gain level, while Left and Right
adjust frequency.
As the function of this button will be a little bit different
in different function, please notice the notes that are
shown on the screen when operating.
33. Enter(TAP) button
This button can activate as two types of function.
˙ Enter: Confirm the edited parameter values.
When there is a confirmation message jump out on the screen, press Enter button to answer
“yes”.
˙
TAP: In the FX1 and FX2 page, it will switch to TAP function, you can use this button to enter a
delay time in tempo with the music being played.
As the function of this button will be a little bit different in different function, please notice the
notes that are shown on the screen when operating.
34. Parameter Adjust knob
This Encoder adjusts the parameter values of selected control that are shown on the LCD display.
Turning it clockwise increases the value and counterclockwise decreases the value.
As the function of this button will be a little bit different in different function, please notice the
notes that are shown on the screen when operating.
18
24 32
32 32
32
34
20
33
28 29
31
30
16
5