Toppro T2208, Руководство пользователя, Страница: 22 / 52

DSP Control
6.3 Assign interface
The 20 main inputs and internal FX returns can be assigned to any or all of the outputs, Aux
sends and main outputs.
In this page, Aux 1-4 and AUX5-8 can switch to each other by touching a switch icon in System
page.
First, let’s see the Aux1-4 mode as below picture show.
Touch Main AUX1-4 on the LCD screen or
corresponding button on the panel to assign input
channel audio to these channels or buses. They will illuminate synchronizing with buttons in
Assign area on the panel after pressed. To adjust output level of the channel audio, you can rotate
Parameter Adjust knob or corresponding Main or AUX1-4 knobs on the right corner of the panel.
Touch AUX1-4 and FX1-2 on the LCD screen or press corresponding button on the panel to assign
input channel audio to these channels or buses. To adjust output level of the channel audio, you
can rotate Parameter Adjust knob on the panel.
Touch PRE on the screen, it will switch to POST, the AUX & FX send will derive its signals from all
channels post-fader. If the icon has not been pressed and not illuminate, by default, the AUX &
FX Send will derive its signal from all channels pre-fader and all unaffected by the sending
channel’s fader position.
In a word, touch PRE and switch it to POST, then you can adjust its level by sliding fader.
Otherwise, the fader wouldn’t function on level adjustment.
Solo
Mute
CH08
-10.5dB
CH08
Assign
FX1 AUX2 AUX4 AUX1 FX2 AUX3
-10.5dB -10.5dB -10.5dB -10.5dB -10.5dB -10.5dB
Sends
PRE PRE PRE PRE
Load
Save
DCA Assign
DCA 1 DCA 2 DCA 3
DCA 4 DCA 5 DCA 6
POST POST
Select
Channel
Left Right Pan Parameter
Aux 1
-10.5dB
48V Phase
Main AUX1-4 AUX5-8
Link
Copy
Channel
Bank Select
Left
Bank Select
Right
Long
Faders
All Faders
DCA
Assign
Channel
Gate
Comp
PEQ
GEQ
FX 1
FX 2 Routing
System
EQ
Main AUX1-4 AUX5-8
FX1 AUX2 AUX4 AUX1 FX2 AUX3
-10.5dB -10.5dB -10.5dB -10.5dB -10.5dB -10.5dB
PRE PRE PRE PRE POST POST
22
6