Topp Music Gear MXi.1222CFX, Руководство пользователя

Страница: 8 / 24

22. MAIN MIX LEVEL
This fader is used to set the amount of signal sent to the main mix output.
23. DIGITAL EFFECTS
It displays the selected preset.
24. PROGRAM(PUSH)
Adjust this knob to select the right effect you wish to perform.
There are totally 100 options for you: Echo, Vocal, Plate and
versatile two-effect combination.
When you are satisfied the right preset, please push this knob
to store this preset you want.
25. DFX/MUTE
Disables the internal effects processor; in this case the red
"PEAK" LED will be lit permanently.
26. DFX TO AUX SEND1/2
The both rotary knobs assign the DFX signals to their respective AUX SEND outputs.
27. AUX SEND CONTROLS
These four controls are used to determine the master AUX SEND levels, which can be varied from
-∞to +10 dB. When the external effect units which have no input gain control were connected to
mixer, you can get a f10 dB gain available from these Aux Send outputs.
As to the AUX4, it can also provide the lovable level adjustment for the internal effect signal.
28. DFX OUT
These control is used to determine the internal DSP module levels and DFX sends output, which
can be varied from -∞ to +10dB
29. DFX TO MAIN
This control is used to assign the signal from FX to
MAIN MIX output.
30. OUTPUT LEVEL
This stereo 12 segments LED meter will be
indicate the level of overall output signal.
31. MAIN/GR
If you release the MAIN/GR button, the signal will
be cone from the MAIN MIX output, it will not be
affected by pressing both GR1/2 and GR3/4
button. When you push down the MAIN GR
button and press both GR1/2 and GR3/4 at the
same time, the signal will be come from the GR3/4
output. When you release the GR1/2 and GR3/4,
the signal will be come from the GR1/2 output.
Control Elements
21 22
23
24
27
33
32
31
25
28 29
26
30
8
4