Topp Music Gear MXi.1222CFX, Руководство пользователя

Страница: 9 / 24

32. PHONES CONTROL
This control is used to adjust the signal present at the Phones output, which can be varied from
-∞ to +10 dB.
33. CONTROL ROOM CONTROL
This control is used to adjust the signal present at the control room output, which can be varied
from -∞ to +10 dB.
34. POWER LAMP socket
This lovable LAMP is very convenient for your operation, it is located
in the top right corner of the front panel, and provides the 5V socket
that can drive standard USB-type lamp.
35. PHONES
This socket will be used to send out the mix signal to a pair of
headphones.
36. PWR LED
This LED indicates when the power is on in your mixer.
37. +48V LED
This LED indicates when the phantom power is switched on.
38. MAIN MIX OUTPUT
These stereo outputs are supplied with both the XLR and 1/4" phone jacks and it is controlled by
the Main Mix Level.
39. MAIN INSERT
These two 1/4" phone jacks are stereo insert points and used to connect processors such as
compressors, equalisers etc.. When insert a external processor into the jack, the Main stereo
signal will be taken out after the main bus and returned into the MAIN MIX output before the
MAIN MIX fader.
Control Elements
34 35
37 36
38 39 40 41 42 43 44
9
4