Topp Music Gear MXi.1222CFX, Руководство пользователя

Страница: 10 / 24

40. DFX OUT
This 1/4" sockets are used to send the signal from DFX mix buses to external devices.
FOOTSW.
This socket is used to connect external footswitch for your convenient operation, it has the same
function as DFX MUTE button.
41. CTRL-ROOM
These 1/4" phone sockets will be used to send the signal to studio monitor speakers or to a second
set of PA.
42. GROUP OUT
These 1/4" TRS jack are used to send out the signal from the GROUP 1/4 mix bus to external
devices.
43. AUX SENDS
These 1/4" phone sockets are used to send out the signal from the AUX bus to external devices
such as effects.
44. INSERT
This is where you connect external sound processors such as compressor-limiter, equalizers, etc..
45. AC Inlet with FUSE Holder
Use it to connect your mixer to the main AC with the supplied AC cord. Please check the voltage
available in your country and how the voltage for your miser is configured before attempting to
connect your mixer to the main AC.
46. POWER Switch
This switch is used to turn the main
power on and off.
47. +48 Volt Phantom Power Switch
It is available only to the XLR MIC sockets.
Never plug in a microphone when phantom
power is already on. Before turning
phantom power on, make sure that all
faders are totally down. In this way, you will
protect your stage monitors and main
loudspeakers.
48. USB PORT
This USB port is used to connect the unit to PC with a transmission line. When it is in RECORD
mode, it can connect with the MAIN MIX output; in the PLAYBACK mode, it can connect with the
last stereo channel 9/10 or channel 11/12 or channel 13/14.
Control Elements
45 46 47 48
10
4