PROGATE User manual V-2022-09-20
39 |
E N
Figure 58GSM Communication> CMS Reporting window
6.
Public IP or domain must be entered. Enter remote port, ping time, encryption key and enable the communication.
7.
If needed, APN/Password/Login/IP/Domain/ Port /PING time /KEY can be set by SMS commands
GPRS network settings
INST000000˽008˽APN#LOGIN#PSW#
008= command code (GPRS network settings)
APN=31 symbols
LOGIN=31 symbols
PSW=31 symbols
Remote control of the module over the Internet.
INST000000˽009˽ADDR#PORT#PING#KEY#
009= command code (Remote control of the module over the Internet)
ADDR = the format of IP address xxx.xxx.xxx.xxx (the numbers from 0 to 255 should be
separated by dot or domain text length of up to 47 characters)
PORT= TCP port number from 1 to 65535
PING= communication control ping time from 30 to 9999s
KEY= encryption key. Encryption key should be the same as server key. Default 123456
Figure 59 Command line> Settings window
8.
SERA2> Settings Check “SERA Cloud Service (default)” checkbox.
9.
Enter Device UID/IMEI. Press
Connect
button and wait till connection will be established. In the bottom in the task bar appears TCP connected
notification.
SERA2 software can remember all IMEI that was entered in the past. If needed to clean the list UID/IMEI, press “Clear History”.
