PROGATE User manual V-2022-09-20
31 |
E N
Figure 46 Users/ Access Control > Users, Users Access Control> Access Shedules and Users/ Access Control> Holidays window
Go to SERA2> System Options> General system Options
Set 1W (1-Wire Bus) to Dallas 1-Wire Bus
Set time zone
Set clock synchronization
Press “Write”
Go to SERA2> System Options> General system Options.
Press "Start iButton/ RFID/ Phone programming mode.
Go to SERA2> Users/ Access control window.
Touch RFID keycards, iButton keys to the reader.
Call to the module from your mobile
RFID keycard, iButtons code, phone number will appear in the list.
Go to System Options> General system Options and
Press "Stop programming" or wait until it will stop automatically.
Edit setting in the Users/ Access control window.
Press "Write"
Periodic, recurring at intervals of time access: access schedules, holidays
Holidays should be considered special days of a week. They are similar, but of higher rank than the standard Monday-Sunday.
Temporary access, that self-destructed after a certain time elapses
Suppose you must create a Cleaning Crew schedule. The schedules are to be set up as follows: Monday-Friday 5 p.m.-1 a.m., Saturday and Sunday 8
a.m.-1 p.m., no holidays. This becomes three separate schedules, as follows.
2 Monday-Friday, 5 p.m.-11:59 p.m. (Remember, the time range cannot cross midnight, so 11:59 p.m. is the limit.)
3 Tuesday-Saturday, 12:00 a.m.-1:00 a.m.
4 Saturday-Sunday, 8:00 a.m.-1:00 p.m.
Note: Holidays should be considered special days of a week. They are similar, but of higher rank than the standard Monday-Sunday. If a day programmed
as a Holiday should occur in the panel, the panel will treat that day as the Holiday type, regardless of the actual day of the week (Monday-Sunday). During
this Holiday, schedules that contain that specific Holiday type will work. The Holiday allows users to further customize how the panel works. For example,
the user can block access to a building on that day, or grant special access during that day. Each Holiday added is considered a full day, extending from
midnight to midnight.
