background image

 

www.crescentindustrial.co.uk

EX30-OCS

 

WARNING!

Electrical hazard! Wearing hearing protection and a dust mask is compulsory when 
carrying out dry sanding work. This machine does NOT comply with ATEX requirements

6.2  Specific safety instructions

 

 

 

ATTENTION!

The machine’s plug must be removed from the power socket whenever any form of 
maintenance is carried out.

This Topfloor floor cleaning machine may NOT be used for cleaning floors that release substances 
that form a risk to the health of the operator or bystanders, or the environment! Only use this 
Topfloor machine on a suitable floor surfaces. If you have any doubts or questions, always 
contact Topfloor or your local dealer.

 

ATTENTION!

Verify that the switch is set to “OFF” before inserting the machine’s plug in the power 
socket!! Move the machine carefully over steps/stairs.

 

ATTENTION!

The machine is supplied with an extension cable as standard. The reach of the machine 
may not be lengthened with an additional extension cable.

Never scrub over the extension cable. 

If you accidentally move the machine or scrub over the cable, switch of the machine and remove 
the plug from the power socket. Check the cable carefully for damage (water can also penetrate 
through small cracks in the cable!) 

ATTENTION!! RISK OF ELECTRIC SHOCK!

 

The machine is UNSUITABLE for operating completely submerged. Attempting to do this can 
cause life-threatening situations

 

 

ATTENTION!

The machine may only be used with earthed power sockets and an earth leakage 
circuit breaker

Содержание EX30-OCS


















Отзывы: