background image

www.crescentindustrial.co.uk

EX30-OCS

 

7. STORAGE

 

ATTENTION!

You are working with an electric machine and (scrubbing) water. Make sure the earthing
and earth leakage circuit breaker are working correctly!! Make sure that none of the 
cables in use are damaged!! You should preferably wear shoes with rubber soles!!

The use of this floor cleaning machine is subject to applicable safety and working conditions 
regulations. In addition to the instructions in this user manual, generally accepted occupational 
health and safety regulations must always be followed. All forms of improper use must be avoided.

 

During the warranty period, a service technician approved by Topfloor may work on the machine.

ATTENTION!
Before changing parts or accessories, ALWAYS make sure 
that the plug has been removed from the power socket!

ATTENTION!
Stay at least 2m away from the edge of a swimming pool, 
pond or open water!!

ATTENTION!
Always be careful when using a hose/blower!

If the machine will not be used for a longer period, it is advisable to carry out the following:

• Clean the machine with a damp cloth. 
• Carry out scheduled maintenance; see Section 10 
• If necessary, apply a protective coating. 
• Store the machine in a dry space.

Содержание EX30-OCS


















Отзывы: